BBRNR - M&T*P2X COPPER SULFATE PURIFIED CONCENTRAT
- MSDS: BBRNR
- Manufacturer: CHEMICALS
- Product Name: M&T*P2X COPPER SULFATE PURIFIED CONCENTRAT
- National Stock Number: 6850-00F005017
Product Identification
Product ID:M&T*P2X COPPER SULFATE PURIFIED CONCENTRAT
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005017
MSDS Number: BBRNR
Responsible Party
Emergency Phone: (201) 499-2401
Cage: 99272
Contractor
Cage: 99272
Ingredients
COPPER SULFATE
ACGIH TLV: 0.2 MG/CUM
SULFURIC ACID (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Hazards
Effects of Overexposure:MAY CAUSE IRRITATION OF EYES, SKIN AND
RESPIRATORY TRACT UPON CONTACT OR INHALATION.
First Aid
First Aid:EYE: FLUSH W/FLOWING WATER AT LEAST 15 MINUTES. SKIN: FLUSH
W/WATER. THEN WASH W/SOAP & WATER. INHALATION, MOVE EXPOSED
INDIVIDUAL TO A NON-CONTAMINATED AREA. GET MED ATT. NEVER GIVE
FLUIDS OR INDUCE VOMITING IF UNCONSCIOUS OR HAVING CONVULSIONS.
Fire Fighting
Extinguishing Media:WATER SPRAY, CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:AVOID EYE/SKIN CONTACT. DON'T BREATHE FUMES.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:MAY INJURE AQUATIC LIFE IF DISCHARGED TO OPEN
WATER. CONTAIN AREA OF SPILL. SOAK UP SAND OR WATER OR OTHER INERT
ABSORBENT MATERIAL. FOR A SMALL SPILL, FLUSTO SEWER W/LARGE AMOUNTS
OF WATER.
Handling
Handling and Storage Precautions:CAUTION! MAY CAUSE IRRITATION. AVOID
CONTACT W/EYES, SKIN & CLOTHING. WASH THOROUGHLY AFTER HALING. KEEP
FROM FREEZING.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Exposure Controls
Respiratory Protection:USE SUITABLE RESPIRATOR IF VENTILATION ISN'T
ADEQUATE.
Ventilation:LOCAL EXHAUST RECOMMENDED/MECHANICAL REQUIRED
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
MSDS DATED: JUNE 1977. PH: 3.8
Chemical Properties
Spec Gravity:1.19
Solubility in Water:COMPLETE
Appearance and Odor:BLUE LIQUID CHARACTERISTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
BASES
Hazardous Decomposition Products:COPPER OXIDE OR SULFATE, SULFURIC ACID
Conditions to Avoid Polymerization:GENERALLY UNREACTIVE
Disposal
Waste Disposal Methods:DISPOSE OF ABSORBENT MATERIAL AS SOLID WASTE.
FOR LIQUIDS, NEUTRALIZE ACID AND PRECIPITATE COPPER AS INSOLUBLE
SALT FOR COPPER RECOVERY. DISCHARGE TREATED EFFLUENT TO SEWER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.